Flow Solutions Since 1898Contact Us for Info or Quote Now

i-Alert2 Pump Monitoring Success Stories

i-Alert-Equipment-Monitoring-Systemi-Alert Equipment Health Monitors - condition sensors, pressure sensors along with the new i-ALERT Gateway offer class-leading continuous machine monitoring of vibration and temperature with comprehensive wireless reporting.  With this system, you can:

  • Monitor the equipment health of any rotating machine such as pumps, motors, fans, and more.
  • Solve Problems with advanced vibration diagnostic tools - available to anyone who can use a smart phone or tablet.
  • Remotely Monitor with 24/7 Continuous operation, Plug and Play Configuration (Auto-detect) and a typical Range of 30-100m (100-300ft.
  • Bluetooth connect to track tri-axial vibration, tri-axial kurtosis, temperature, and run-time hours 24/7/365. Wirelessly sync data to the i-ALERT mobile app via Bluetooth Smart enabled devices. Check every five minutes and receive alarms if the equipment is outside normal operating conditions. Visually alert users and wirelessly broadcast an alarm message.

i-Alert Monitoring Success Stories

Bio-fuel - Premature bearing failure traced to structural resonance

A bio-fuel producer takes in waste oil products and turns them into renewable diesel. Shortly after a pump that is used to transfer hot hydrocarbons was repaired, it experienced bearing failure...

Nuclear Powerplant - Continuous condition monitoring proves its worth in nuclear power plant

A nuclear power plant in the process of a multi year shut-down program uses vertical turbine pumps to circulate cooling water. To help evaluate their performance, the pumps were fitted with i...

Powerplant - Repeated condensate pump failures resolved using continuous monitoring data

A geothermal powerplant in the California desert was plagued by frequent failures of their condensate pumps. On average the bearings and mechanical seals needed to be replaced every two weeks and...

Chemical Process - Intelligent control ends string of failures with overflow pit pumps

A petrochemical plant uses an overflow pit to collect the waste from several different chemical processes. Because the waste contains solids and mixed particulate matter, the pit was fitted with...

Oil & Gas - Refinery

A major European refinery has 700-800 pumps that must be maintained in top working condition. This was accomplished through a maintenance program based on measuring vibration using micro-log data...

Chemical - Bad Actor Process Pump

A North American-based chemical company has many pumps that must be maintained in top working condition. This was accomplished through a predictive maintenance program based on measuring vibration...

Cooling Tower - Condition Monitoring from a Distance

A critical cooling tower at a New Jersey hospital failed unexpectedly and an emergency repair was required. Prior to the failure, only annual vibration checks were allowed since the cooling tower...

Petrochemical - Cut Data Collection Time in Half

A major petrochemical additives company has a large number of pumps that must be maintained in top working condition at all times. This had been accomplished by measuring vibration using walkaround...

Pulp & Paper - Paper Products

To ensure productivity, a Fortune 500 paper manufacturer must keep all of their rotating equipment, including their tissue machine rolls, in top working condition. Normally this is accomplished...

HELP ME WITH MY APPLICATION

Call Now Button